Lace is an attractive material for any designs. You can add your lace to your decorative towels and serger edges. You will need to learn the steps to get started if you have not stitched your decorative towels. You can add lace trimming and serger edges to finish towels you have purchased instead. When lace and serger finishes are attached, Terry cloth towels look great. The following are the way to get started:
- Getting started with lace trimming
You will need a plain or unadorned towel, and lace edges, and a gallon, i.e. the ornamental trimming lace. The narrow bands of embroidery should include lace, braids, or thread colors of gold and silver. Maybe you want lace better. Don’t forget to make sure that the material is machine washable. Get the medium-weight lace, such as the taffeta, satin, or polyester.
- Creating lace trimming for bathroom towels
Follow these steps once you have your materials gathered:
(1) Use the decorative trimming then cut an inch of the lace, continue cutting until it extends considerably a distance of your towel width. Fold the fabric under about a half-inch, folding it at the ends. Pin the lace to your towel in the desired position. Pin over the lower borders or edges.
(2) Stitch along the ends you have folded. Also stitch along the edges of your scallop sides and try to keep your stitching in a straight line.
(3) Repeat step one by using the edges of your lace. Now you want the lace to fasten to the lower borders. Stitch and continue along the end folds, and to the upper borders. You should keep in a straight line. Unless you need to finish the upper borders of your lace, you should be finished at this point. In this instance, cover the opposite side of the bias band. You are ready to create your over-lock finished edges now
- Creating serger, finished edges
Plain material and a special needle, such as the tapestry are needed. To get started, you will also need nylon, combined threads of wool, contrasting threads of normal value, etc.
- To equalize your stitch, your serger should be set at three-threads which create the serger. Both loopers of yours should be threaded as well. Use your common threads and nylon thread. Set the thread to the desired widthwise position by heaving it through your needle and preparing your stitch. Its length at least should be 1 mm.
- Start stitching whilst holding in place the tail string tight along the selvages. Avoid trimming the edge of your cloth. Left the tails at the extremity of your cloth.
- You will need a stitching needle now and thread it about 1 inch. Begin weaving your tapestry needlework so it falls beneath the stitches at your serger. You will need cutting tools designed for sewers to cut it off since the tail strings may have extra length.
- You may want to add a few other bathroom accessories to set off your patterns once you finish your lace and serger. Consider creative towel hooks, rings, and bars.
Many types of rings, hooks, and bars are available online, including the medallion designs that comprise bold backs. Your new-laced towels will offset by the stylish designs. Also find the tie back iron bolder. These items will create luxury to your bath. Many other designs including Décor wooden pole sets are available to bring out your new towels. You have your rings, hooks, bars, and towels now, and then you might want to offset the room further by adding bordered mirrors.